| DediProg在线烧录器 >> SF100 >> SF100 SPI专用在线烧录器 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Description :
The SF100 is a high speed “In System Programming” programmer to update the SPI Flash soldered on board or Freescale MCU using Ezport. The programmer is easily controlled by the computer DediProg Software through the USB bus offering friendly interface and powerful features to users. Features :
High performance(tested and measured with software version 2.0.37.2 and from a single source of serial flash memory supplier):
Hardware : SF100 is designed with ISP header, through an appropriate connector, users can connect the programmer and drive the SPI signals, supply the memory and control the controller or application status.Please refer to Table 1 for the SF100 2x7 header pin out. DediProg also provides the SF100 ISP Cable which is used to connect the SF100 programmer to the 2X4 2.54mm ISP Pin Header on board, please refer to Table 2 for the SF100 ISP Cable 2x4 pin out. Table 1: SF100 ISP Header Pin Out (2x7)
Table 2: ISP Cable Connector Pin Out (2x4)
Contents :
Hardware Requirement for ISP :
Option Purchase :
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| [打印此页] [关闭窗口] [返回首页] |
Description :